Network Access Control

Hi, We have ACS 5.8 with interface Gi0 assingened ip address . We want to add secondary ip to Gi0 interface Is it possible ?

Hello, I was wondering what people thoughts are; I have a question about NAC, so, if we have a dot1x enabled port on a switch with a client that is successfully authenticated and authorised to connect to the network, the clients MAC address is entere...

Hi,  I have a really simple E-Mail for "Email Notification" in the ISE with a short welcome text and the login credentials for new guest users (created via the sponsor portal).  My problem is that there emails are displayed correctly in thunderbird u...

Hi, I'm trying to integrate WSA with ISE using PXGrid, But  WSA doesn't show STG from ISE. see below

Hello, We are to deploy ISE 2.1 for dot1x wired and wireless authentication(Aruba). We need to find if SG 300 and SF 300 switches are compatible for full fledged deployment. Our requirement is to use posturing for wired and wireless clients. its been...

I have discovered the following profiling issue in regards to the frequent WiFi disconnects and reauths that has been plaguing our environment since July 2016.   The root cause appears to be the ISE profiler is changing Identity Group profiles consta...

Hi, Iam getting below error message while importing devices(using the template) to ACS 5.3 server. checked the header of the file using text editor. I tried with the new csv file by copying the contents of the import template. But, no luck. Please ad...

Hope this is the right category for this issue... I am trying to set up SSL VPN for my users with an ASA.  I am using a 5505 in my lab.  The VPN users will need to authenticate against the Active Directory.  I set up the AAA server using LDAP to a Mi...

Hi everyone, We install test ISE machine, now we want to install real cisco ISE with real license but we configure all on LAB ISE, on this ISE has expired test license and we can't n on WEB administration. How we can inside on Test machine? Best Rega...

I am just wondering if anyone was able to successfully implement smart card authentication for vty and console session.  if anyone did, can you please point me to the documentation and the implementation guide?  thanks