Network Access Control

AD issues while migrating from cisco ACS 4.x to 5.x? AD base authentication failure

 Hi there guys , I was wondering if anybody else have the following problem:Apple iOS 8.x users are not able to register their devices on the ISE portal (native supplicant provisioning).After they receive the redirection from the WLC, they freeze. Ap...

Hello,I have try this week to Backup the ISE and Prime to a Synology NAS.Since a time i´m sure that the configuration on ISE an Prime are ok also DNS an Ping are ok.The staging url is nfs://<servername>.it.lokal:/volume1/CiscoBackup/The debug on both...

Hi, We are planning to upgrade our ACS server SNS 3415 appliance from 5.4 to 5.5 or 5.6 as 5.4 is struggling to talk to AD which is on 2012 R2 for wireless authentication. I have downloaded both the images now for SNS appliance (5.5 & 5.6) , which on...

I have a customer running 5508 WLCs across the estate, and I'm retrofitting IEEE802.1x authentication for the corporate WLAN, and WebAuth for the Guest WLAN...they have PSK on both at the moment :(They have AD and are showing great interest in ISE an...

HiI have set up self registration on an ISE 1.2 and am using a customised portal.Everything works OK except for one annoying element.Although I have assigned a time profile of 30 days as a test - the self registered accounts always expire after 5 day...

Hi All,             I have 4 TACACS servers (1,2,3,4). 1 being the primary and the other 3 are secondary. The issue is 2 and 3 are syncing but the 4 is not syncing when i made changes in 1. I can see the all the AAA clients in 2 and 3. But when i sea...

I am attempting to set up 802.1x authentication on our Cisco 7942 phones and I am not really too familiar with the settings.  We have several small sites that use Aruba RAP devices that are centrally managed by an Aruba controller.  The authenticatio...

Hi all!I want to use an External  RADIUS Token Server for ISE Admin Access Authentication and Authorization. Authentication works, but how do I map the users  to Admin Groups? Is there a way  to map a returned RADIUS Attribute  (IETF "Class" or Cisco...

HelloI am migrating from a Cisco ASA 5520 (ASA version 8.4(6)5 to a Cisco ASA 5585. We have LDAP issues logging into to our vpn client software. I assume the LDAP password may be incorrectly entered on the new 5585. No service password- encryption or...

Has anyone successfully migrated from ACS to ISE especially with WLAN or WiFi users? If you have, please share any information.

Hello Our customer wants to be authenticated on ISE 1.2 (as admin) against an external radius server (like ACS not microsoft). How could i do that ?Is it possible while retaining internal admin users database in a sequence "external_radius or interna...