Network Access Control

how to configure router to use ip pool on the aaa server for vpn clients . i want to use vpn clients to connect to the router. authenticate using the aa server username databse and also use the ip pool cretaed on the aa server. i am not able to find ...

We want to implement a wireless secure network using eap-tls. We are using ACS appliance 3.3 version and trapeze access points. The clients are windows XP. During testing at lab ,wedidnt use Active directory. The ca in the lab was installed on standl...

how to configure router to use ip pool on the aaa server for vpn clients . i want to use vpn clients to connect to the router. authenticate using the aaa server username databse and also use the ip pool cretaed on the aaa server. i am not able to fin...

CTA for Linux is with 802.1x supplicant. Please advice how CTA without the supplicant helps achieve Network Admission Control (NAC). Please reply link also.

Hi,Consider a case of CTA 2.0 with 802.1x supplicant talking to a 802.1x L2 NAC enabled switch and having ACS 4.0 (for authentication) which is in turn talking to a Microsoft Active Directory. I installed the CTA 2.0 client and I could see the option...

Currently, we are able to get the User-Name [radius attribute 1] to reflect in the ACS log. A debug radius at the AP show this radius attribute is passed back to ACS. However, cannot seem to find the attribute to pass user IP address back to the ACS....

hii have configured cut- through proxy on the router with acs.i am facing a strange problem .my routers's ethernet 3/0 interface ip add is 10.1.1.1/24 and the acs server is 10.1.1.2/24 and the host ip is 10.1.1.3/24my routers' e2/0 interface is conne...

I am looking for a solution for authenticating the PC's based on MAC address in a wired network with a centralized radius server. The documentation has given a procedure which I did; but takes up to 8 minutes in a DHCP environment to authenticate. It...

Hi,We have a ACS appliance that is being integrated into Windows AD to use AD Authentication.The Windows CSAgent is installed on a member server. The service is running with the Domain Admin account.I can get the list of the Domain and AD Group (with...

hasn't enyone out here worked with cut-through proxy with acs. is there no one out here to help me out with cut-through proxy. sebastan

I have a HP server running Cisco Secure ACS v4.0.1 on an HP DL380, with Win2003 Server Standard Edition, SP1. Processor is Xeon 2.4Ghz, Memory is 1.5Gb. Complete software version is 5.2.3790 Service Pack 1 Build 3790.When the server starts, CSAuth fa...

Hello.I am trying to get DACL's working on my FWSM (2.3(3)) From ACS 4. The users authentication is passes through to an RSA 6.1 token server. The user authenticates fine, however the ACL is not downloading.The bebug shows the following as the user a...