Am having a persistent Anyconnect vpn disconnection with the an error relating to MTU. It has been working well until I started getting continuous disconnection after a minute or less. At first I though to be related to network stability from the c...
Hello Team,We have integrated Aruba-CX switches with Cisco ISE for Endpoint profiling. Cisco ISE is configured to use FQDN and other attributes to identify and profile endpoints such as printers, IP phones, etc.However, we've observed that the FQDN a...
Hi guys,I´m using ISE version 3.1 with Aruba Access Point.From RADIUS Accounting Report, there are information about START and STOP, but I CANNOT SEE Account Status Type equal INTERIM-UPDATE.Analyzing the absence of interim-update logs of the radius ...
Hi, I would need some help here. We have an Internal PKI Server integrated with AD and ISE as the AAA server authenticating users and devices. All domain users and machines are automatically placed on internal VLAN upon the dot1x EAP authentication. ...
HiI have a non window/ios/android device that uses security protocol "WPA2-PEAP-RADIUS" to connect to our corporate network.Our device only require SSID, Username and Password input to join the network. Previously, it was working fine until a recent ...
Hey,I'm doing a new pilot to test some stuff.I'm trying to authenticate a PC with external certificate. I create a new policy that checks the "Issuer - Fingerprint SHA-256" but for some reason when I'm looking in the ISE Radius logs all I see that th...
Hi all; Based on Ubiquiti admin guide for RADIUS CoA supportability in APs line of products, you must satisfy the following requirements from the RADIUS server point of view: By default, Ubiquiti APs send NAS IDs to RADIUS server based on BSSID para...
Hi Everyone, I just read that Google Gsuite expose also an LDAPS connection, I would like to know if anyone had a chance to test it and eventually if it allows to retrieve Google identity attributes (groups, etc) with Cisco ISE. I am considering the ...
I need to create a read only custom privilege level for an automated service acct that can execute the show run and show tech commands. I used privilege level 2 for the radius authentication and have the below commands set on my test switch. I am abl...
Does anyone did configure the Infinera authentication with Cisco ISE ? if you do, please could share with me the attributes and setting that you used in the TACACS Profile.
Hi, I am studying CCNP Switch course and stuck in AAA authorization topic. I do not understand what actually is purpose of the following command chain 'aaa authorization network ....'. Cisco books and web-pages define this like sonething: network: ...
Hello,I have an issue with AP's that during NAC implementation on the port they should first get profiled by sending device-sensor attributes to ISE and once they get profiled they should do CoA and hit the rule that allows them communication to WLC ...
Hello team, In ISE 3.2 (standalone node) have set up REST ID with Azure following all I found in this two documents https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/218197-configure-ise-3-2-eap-tls-with-azure-act.html http...
Our customer exisitng environment all PC join to entra id and no any infra in on-premise Now. they would like to implement new Wi-FI with kind of this solutions but it's look like very new for us and less experience Therefore, may I asking in this co...
Hello, I have some questions after going through the great post from @Greg Gibbs - Cisco ISE with Microsoft Active Directory, Entra ID, and Intune - Cisco Community Specifically, about the section of User attributes from Entra ID. 1) There it is stat...
