hello every body my issui try to log my success login on a CISCO 2950 Catalyste but on conf t i have not option login on-success log !!! how can i do ty
This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
hello every body my issui try to log my success login on a CISCO 2950 Catalyste but on conf t i have not option login on-success log !!! how can i do ty
Does anyone of the correct JSON body required to update a static SGT mapping via REST. Here is what I am trying: I am doing a JSON PUT to my admin node: https://10.0.128.237:9060/ers/config/sgmapping/17a7afe2-b3e5-459c-8090-587ed1fb3381 The bod...
Dear All,We are using IBNS 2.0 with dot1x and mab.Everything so far is working in our testing and when we simulate an ISE failure the Critical service template allows the end hosts access to the network.When the ISE server comes back online, the dot1...
In this discussion, Cisco engineer mentions that "For posture assessment you only need to deploy the Posture Module". However the AnyConnect 4.7 config guide states "You must install the Network Access Manager before ISE Posture starts. ISE Posture u...
Hello everyone, We will be forwarding ISE logs to our SEIM (Helix) I wanted to know what are the top 5-10 logs I should be alerting on? I need to put together an action plan so I cant do that for all the logs. Thanks
I have configured AnyConnect and the VPN connects etc, my question is, where does AnyConnect pull its routing table from and is it possible to add routes? Also, is it possible to change the default GW that it assigns to clients?
Hello Everyone I have at home for learning purpose an ISE installation together + a Cisco Catalyst 2960-x. I did not work on these devices for the past few days... so I didnt changed anything. Today I started the LAB again, and when I wanted to conne...
Hello, Can someone give the steps to enable ssh access in cisco ACS. I am the administrator for cisco acs and I can login into the gui without any issues but when I login via ssh it says access denied. Cisco Secure ACS Version : 5.6.0.22.2 Thank yo...
I have turned on the aaa command authorization without applying adequate privileges to the user. I can now login through that user but the ASA 5510 displays an error :============================EUKFW2# show running-config ^ERROR: % Inva...
Hello experts, I have a question about ACL.I have configured the first requirement like below on both R1 and R2.!access-list 101 deny tcp 192.168.2.0 0.0.0.255 host 192.168.1.3 eq www! Though it works, I found that my PC in 192.168.3.0 network could ...
I have tried to integrate ISE with Azure using SAML. Currently, I have only the Base licence.When I am trying to create the new Service Provider Info. we called the IDP in My Devices portal. At that time its showing License warning.Because we don't h...
Hi We have a ISE 2.6 with 802.1x in a few site and now we want apply 802.1x wired in all our sites. Some small site have a Cisco 29XX with a EHWIC-D-8ESG-P and I have some doubts about the comtibility with Cisco ISE 2.6. The ISR29XX is marked as comp...
ISE Version : 2.2.0.470 - Win-server 2012 R2 64bit Domain : lab.localand the connectivity is perfect and both is reachable !! Hello all im facing trouble with ise 2.2 integrating with server to join in domain this issue is drive me insane i had try...
Hi,I have the following issue:Several hosts on a specific VLAN cannot reach a VNC server which is located in the same VLAN. All the ports are running 802.1X and hosts are authenticated based on certificate.The hosts that have the issue are always aut...
Has anyone tested or confirm whether Anyconnect NAM and Windows Native Supplicant can run in parallel on a machine? We have some users part of two organisations that use two separate ISE instances. Typical Org A users have NAM on their machines. Typi...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
06-01-2023 10:11 PM | ||
05-30-2023 06:18 AM | ||
05-30-2023 03:30 AM | ||
05-24-2023 09:35 AM | ||
05-23-2023 08:43 PM |
User | Count |
---|---|
8 | |
8 | |
7 | |
5 | |
3 |