CISCO MAB Auth for Wireless devices

[henokk60]

Hi All

I want to configure MAB authentication for wireless users. The same SSID is used for 802.1X, and I would like to use MAB for specific users. Is that possible, and how can I achieve it?

Thanks,

[MHM Cisco World]

Same SSID have both 802.1x and mab' I dont think it work

For new SSID using MAB' you can use 

Local mac authc 

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/213922-configure-mac-authentication-ssid-on-cis.html

MHM

[balaji.bandi]

yes its possible, depends on what controller you using the configuration need to look their documentation.

Good video how you can configure on ISE :

ISE deployment :

https://community.cisco.com/t5/security-knowledge-base/ise-secure-wired-access-prescriptive-deployment-guide/ta-p/3641515

https://www.youtube.com/watch?v=PRlLDhbljIE

[ahollifield]

Not possible. You can do 802.1X with MAC address conditions but not both. What is the use-case? What is the access method for MAB? PSK? Something else? open?