Is there a way to check if USB is connected to the ise cimc?

[CCC3]

I need to reinstall the ise, but it came out with usb connected when I worked on it before. Is there any way to check if usb is connected on cimc or ise?

[balaji.bandi]

what version of ISE and what appliance model

check below options :

https://www.cisco.com/c/en/us/td/docs/security/ise/3-1/install_guide/b_ise_InstallationGuide31/b_ise_InstallationGuide31_chapter_4.html#id_70768

https://www.cisco.com/c/en/us/td/docs/security/ise/3-1/install_guide/b_ise_InstallationGuide31/b_ise_InstallationGuide31_chapter_3.html#installiseusingcimc

[CCC3]

model : 3755

version : 3.2

[balaji.bandi]

above steps should work for you.

[CCC3]

Thank you for the answer, but it's not the answer I want. I'm wondering how to check if the USB is connected to the ise.

[balaji.bandi]

I have never gone that deep to check.

when you plug the USB to appliance you see the Logs in CIMC (check chasis --> faults and logs)

also if you enable to USB Option in the CIMC - if the Device plugged in you see the boot option can select USB.

if you have appliance in front of you - its not hard to test it.