10-21-2021 01:22 AM
I can take the backup of Operational Data Backup on ISE.
However, I can not take Configuration Data Backup and, the below log is shown on CLI.
ise/admin# backup testbackup repository test_repo ise-config encryption-key plain password123
% Internal CA Store is not included in this backup. It is recommended to export it using "application configure ise" CLI command
% Creating backup with timestamped filename: testback-CFG10-211021-1716.tar.gpg
% backup in progress: Starting Backup...10% completed
% backup in progress: Validating ISE Node Role...15% completed
% backup in progress: Backing up ISE Configuration Data...20% completed
% backup in progress: Backing up ISE Indexing Engine Data...45% completed
% Application backup error
what causes this problem?
Solved! Go to Solution.
10-25-2021 07:05 PM
I solved this issue by the command #reset-config (this is for ADE OS to be reset).
Thank you everyone.
10-21-2021 01:58 AM
Hi,
try below solution.
rate and and mark as answer if this solved your concern
10-21-2021 01:59 AM
- Check if you have sufficient disk space in the target repository , or use an external repository.
M.
10-21-2021 02:00 AM
check this thread may help you :
10-25-2021 07:05 PM
I solved this issue by the command #reset-config (this is for ADE OS to be reset).
Thank you everyone.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide