cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1225
Views
0
Helpful
1
Replies

VLAN DHCP release on ISE

kharada
Cisco Employee
Cisco Employee

My customer tested VLAN DHCP release function, and found that it becomes an error (ui_vlan_install_error_message) when they waited for approximately 60 seconds without pressing both buttons of "Install" and "Don't Install".

[Q] Can we change this time-out value(60sec)?

Thanks,

Kazuhiro

1 Reply 1

hslai
Cisco Employee
Cisco Employee