VSA to set in- and outbound vc-class atm via radius

[d-mark]

Hello,

does anyone know if it is possible to apply an inbound 'vc-class atm 'and also an outbound 'vc-class atm' dynamicaly via a vendor specific attribute. I found 'atm:vc-qos-policy-in' respectively 'atm:vc-qos-policy-out' but that doesn't seem to work.

What I want to do is limit the up- and downstream bandwidth of DSL-Dialin connections.

Thanks in advance

Mark

[owillins]

PPPoE session limits created in a VC class using the "pppoe max-sessions" command take precedence over the limits created with the "pppoe limit per-vc" command. PPPoE session limits created on a PVC and ATM PVC range take precedence over limits created in a VC class.