03-01-2019 07:30 AM
Hi,
what OVA image should I download from Cisco.com for an ISE Standalone installation?
Thank you,
George
Solved! Go to Solution.
03-01-2019 01:00 PM
We have a couple options depending on whether you are doing
1) Lab Evaluation or Production Deployment
2) VMware vCenter 6.x or other Hypervisors
It should be clear from the naming in the Software Download area which is for which.
Please see the ISE Installation Guide for supported hypervisors and minimum requirements. It also talks about Network Deployments in Cisco ISE so you can understand the personas and sizing including Standalone and Distributed ISE Deployments
Also see Getting Started with ISE for initial setup. There is also a great YouTube video Installing ISE 2.4 on VMWare vCenter 6.5 from OVA Package using the OVF Tool if that works for you.
03-01-2019 01:00 PM
We have a couple options depending on whether you are doing
1) Lab Evaluation or Production Deployment
2) VMware vCenter 6.x or other Hypervisors
It should be clear from the naming in the Software Download area which is for which.
Please see the ISE Installation Guide for supported hypervisors and minimum requirements. It also talks about Network Deployments in Cisco ISE so you can understand the personas and sizing including Standalone and Distributed ISE Deployments
Also see Getting Started with ISE for initial setup. There is also a great YouTube video Installing ISE 2.4 on VMWare vCenter 6.5 from OVA Package using the OVF Tool if that works for you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide