Is it possible to issue commands to the router from guestshell?I know that I can use "dohost" to read outputs from the router like dohost "show clock" but is it possible to enter configuration mode and issue commands from whithin the guestshell?Regar...
Forum Posts
Resolved! Guestshell on ISR - Receive IPv6 traffic
Hi, I'm experimenting with guestshell on ISR routers (1111, 4221 etc) and from the information I found I need to configure NAT in order to access the outside network from within the virtual environment and also through NAT I'm able to receive traffic...
Hello, I'm wondering how to remove elements of the config of a switch through RESTCONF. For example, I can add a class-map with RESTCONF by sending a PATCH, PUT or POST to this URL "data/Cisco-IOS-XE-native:native/policy", with this data:{ 'Cisco-IO...
Hi All, Is there a way to run show commands through RESTCONF on IOS-XE ? For example, I want to run the the command "show ip igmp snooping groups" as I didn't find any YANG model to retrieve the operational data of the IGMP snooping.Also I didn't fin...
Resolved! NETCONF on CSR 1000V
I am trying to create a lab using csr1000v-universalk9.16.06.04 on VMWare WorkstationI have followed the standard configs1. Created username and password with privilege level 152. Generate certificate3. netconf ssh4. netconf-yang5. line vty 0 4 - tr...
Can someone tell me the description for Cisco ETSPR service level. I'm looking for Cisco's official description for this service
Resolved! NX-OS 9.3.3 vshell>
Hello all I am trying to boot NX-OS in a KVM environment. Every time it boots and stops with vshell> prompt. Any suggestions to fix this?Thank you
My question is that I am about to purchase a Cisco 5525X firewall. I have to implement an IDS/IPS solution as well? Does the 5525X firewall have the option to configure IDS/IPS in its IOS? Do i have to buy a different device in order for me to implem...
Hi, I've written a really simple webhook listener in PHP and I've subscribed to it in the WLC. The WLC says it successfully publishes data to the webhook, but all I get is jibberish blank characters, special characters, etc. I tested the same webho...
Hello ,i trying to write a script with event manger but i can't use the dollar sign ($) for using the value of the variables i tried on routers 2900 and ISR 4300 on both on them it didnt work. for example : action 0010 regexp "^.*([0-9][0-9][0-9]):...
Resolved! ISR 4k Docker/Fedora OVA usrname & pwd?
i am trying to install the fedora OVA from here https://developer.cisco.com/kvm/ onto a 4331 ISR router but dont have the initial user name and password to login into the fedora console to confirm if the ova install worked, please help? i was brought...
I can see the router running at 95% memory , there’s a “ license auto update “ process using all of the cpu. Router# sh proc mem sorted holdingProcessor Pool Total: 1688360784 Used: 306333648 Free: 1382027136 lsmpi_io Pool Total: 6295128 Used: 6294...
Hello all,I have been connected to Chelsio adaptor with cisco Nexus9000 93180YC-EX chassis 100G AN on . Link comes up fine all ports except on Port 49 and 50. Link training is getting failed . is their any special about this port.
Hi All Im trying to write a script which SSH to a switch runs the show interface name and the using regex pulls back interface name and Last input never unfortunately i'm struggling with re module and my regex. I have included an example regex and i...
I’m trying to implement a Python script to collect to some outputs from Switches and routers. My problem is that I need to go through a proxy server. The flow is like this: Personal Mac ----1-----> jumpbox ----2----> Nexus SW Step 1:- Authenticat...
