3750 switch and EEM

[Wassim Aouadi]

Hi,

I can't get into event manager configuration mode. I have a 3750 switch with IOS 12.2 IP Base.

TNSWACCS02A2#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

TNSWACCS02A2(config)#even

TNSWACCS02A2(config)#event ?

% Unrecognized command

TNSWACCS02A2(config)#event mana

                      ^

% Invalid input detected at '^' marker.

TNSWACCS02A2(config)#do sh vers

Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(50)SE4, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

[Joe Clarke · Accepted solution]

Full EEM is not available in IPBASE in 12.2(50)SE.  If you upgrade to 12.2(55)SE you will be able to use EEM in IPBASE.