I have my CW2000 set to sychronize between ANI and RME and when I look in the Device Sychronization Status Log I see that indeed ANI has been sending device info to RME.
I would therefore expect new devices that I put on the network to appear in the RME Inventory but when look in Import Status they are not in any of the options.
Should this work or have misunderstood what the schronization does.
I have checked the anisync.log file and the devices are being sent as below, but I can't find them in RME anywhere, they are not in any of the Import Status Categories
2005/02/24 20:05:46
cw2000
ANI
3.0
ANI
;
Cisco Systems NM data import, source = ANIServer4.2-cw2000; Version = 2.0; Type= Csv
;
; Table definition.
;
;
; Columns of the table.
;
; Col# = 1; Name = Device name;
; Col# = 2; Name = RO community string;
; Col# = 3; Name = RW community string;
;
; Rows of data.
;
10.251.189.14,xxxxx,yyyyy
161.12.227.10,xxxxx,yyyyy
ihpx3501.hydro.co.uk,xxxxx,yyyyy
10.28.39.112,xxxxx,yyyyy
172.17.21.14,xxxxx,yyyyy
161.12.252.78,xxxxx,yyyyy
10.1.39.102,xxxxx,yyyyy
2005/02/24 20:06:59 Send addDevices to Essentials successfully. Number of devices= 7
