01-24-2013 05:50 PM
With Tejas Shah
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about how to manage your wired and wireless network using the converged Cisco Prime Infrastructure Application. Cisco Prime Infrastructure combines the wireless functionality of Cisco Prime Network Control System (NCS) and the wired functionality of Cisco Prime LAN Management Solution (LMS), with rich application performance monitoring and troubleshooting capabilities of Cisco Prime Assurance Manager.
Tejas Shah is a senior technical marketing engineer for Cisco Prime Infrastructure and Collaboration products. He has deployed Cisco Prime Collaboration Manager at various customer sites to help customers monitor and troubleshoot their video infrastructure. In addition, he is part of the Network Operations Center team at Cisco Live events for six years. Shah joined Cisco in 1995 and was in the Technical Assistance Center team supporting various network management system products for more than six years.
Remember to use the rating system to let Tejas know if you have received an adequate response.
Tejas might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Network Infastructure sub-community discussion forum shortly after the event. This event lasts through February 8, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
02-07-2013 03:40 PM
Is there a way to decouple the database from PI ? that way our deployment would be way more scalable.
Currently there is no way to decouple database from PI. I haven't seen any plans to do so yet.
Also it would be great to know if PI supports two or more NICs, just like Iris de Boer asked above.
Please see the thread above where I have replied to this.
02-08-2013 05:22 AM
Dear Tejas,
I installed Cisco Prime Infrastructure 2.1 for 60-days evaluation and i added routers, switches and APs. I configured SNMP community and telnet credentials. I can see clients on Dashboard, but when i go to reports and generate them for last hour, it displays "None Detected".
Did i miss something?
Please advise.
Moustafa
02-08-2013 11:22 AM
Good observation Moustafa,
I did run a client count report for last one hour and I was able to generate the report. I need to know more specifics like What report are you running? what type of clients are you selecting? Do you see those clients associated or connected in the "clients and users" dashboard? Please advise, and I can look into this even after this event ends..
best regards,
Tejas
02-08-2013 05:59 AM
Dear Tejas Shah,
Can you provide good guide how to add cisco routers,switchs to PU 1.2
I have problem: i added switch, but i just see its name on page Operate/Device Work center and it shows that Managed. But all dashboards are empty. All documentations are for old versions.
Please, provide normal step by step guide for configuration Prime Infrastructure.
02-08-2013 06:37 AM
There is a very nice deployment guide for PI 1.2 with step by step procedure posted here:
http://www.cisco.com/en/US/customer/products/ps12239/prod_white_papers_list.html
02-08-2013 06:11 AM
And it doesn't work with snmp v3..
02-08-2013 06:35 AM
Cisco Prime Infrastructure supports all versions of SNMP: v1, v2c, and v3 (noAuthNoPriv, authNoPriv, authPriv).
02-08-2013 08:04 AM
That is correct Marvin.. Just a side note. We had some issues initially with PI 1.1 and SNMPv3, but we had successfully used PI 1.2.1 with SNMPv3 at Ciscolive UK couple weeks back, and it worked great.
02-08-2013 12:17 PM
I'd like to know if there are any known interoperability issues when attempting to manage access switches/stacks as every 3750x running lanbase and 2960 comes up as "Managed with Warnings". Our cores running IPServices are managed with no issues. It says to see the inventory.log file, but the erro thrown is nonsensical.
"
2012-12-12 10:39:44,143 [ICE Service[ 1]Thread: 6] ERROR inventory - VALIDATION_ERROR
I've This was an issue from the first deployment of PI 1.2 and continues in version 1.2.1.012.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide