ASR 1002 - MIB / OID for CPU and Memory

[AdamBusch86077]

I have been searching all day to find the appropriate MIB file to pull CPU / Memory data off of an ASR 1002.  

[balaji.bandi]

is this something that works for you ?

https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/118901-technote-snmp-00.html

[AdamBusch86077]

I found that link in my searching.  I tried those MIBs with corresponding OIDs but was unable to pull any traffic.  I get the error: SNMP_EXCEPTION_NOSUCHOBJECT error.

I know my community string is set correctly b/c I can pull basic ping and some port traffic. 

[balaji.bandi]

have you downloaded the MIB and put them in right place ?

https://www.cisco.com/c/en/us/td/docs/routers/asr1000/mib/guide/asr1kmib/asr1mib3.html#wp2178744

run snmpwalk, post complete error.

https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/116213-trouble-asr-eem-00.html