Cannot access CISCO PI GUI

[Sarah.Hussein]

Hello Team,

I got a problem after installing CISCO PI [CISCO-Prime-PI-VA-3.3.0.0.342], I installed it on VMware Workstation as a trial version. I can access it normally through CLI, but GUI doesn't work. Noting that I get the below outputs.

CISCO-Prime/prime# ncs status

sh: /opt/CSCOlumos/bin/wcsadmin.sh: No such file or directory

CISCO-Prime/prime#

CISCO-Prime/prime#

CISCO-Prime/prime# show application

<name>          <Description>

x          

CISCO-Prime/prime#

CISCO-Prime/prime# show disks

disk: 1% used (184332 of 45380656)

temp. space 2% used (35848 of 2031952)

Internal filesystems:

  all internal filesystems have sufficient free space

Please support,

Sarah

[marce1000]

 - The 'no such file or directory' shouldn;t happen ; re-install it again and or verify compatibility with the VMWARE version used.

M.

[Sarah.Hussein]

I reinstalled it, but with the same issue

[marce1000 · Accepted solution]

 - I don't think prime is supported on VMWARE Workstation ; you need at least ESX(i) ; check the links below :

https://learningnetwork.cisco.com/thread/118959

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-3/quickstart/guide/bk_Cisco_Prime_Infrastructure_3_3_0_Quick_Start_Guide.html

    - When looking at the Quick Start Guide goto 'Minimum server requirements'

M.