02-13-2011 06:36 PM
Hi Gurus,
Do we need to enable HTTPS and SSH both on device, to enable access from CCP? Or only SSH would be enough?
Best Regards,
Ahmed Shahzad.
Solved! Go to Solution.
02-16-2011 06:48 PM
Hi Ahmed,
For CCP to discover a device you need to have HHTP or HTTPS configured on the device as well as SSH. Refer to - http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_4/guides/getting_start/creatcom.html#wp1057296 . Also refer to the CCP Quick Start Guide at http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/guides/CiscoCPqsg.html
Over all link to CCP documentation is - http://www.cisco.com/en/US/products/ps9422/tsd_products_support_series_home.html
Hope this helps.
Regards
Derek Clothier
02-16-2011 06:48 PM
Hi Ahmed,
For CCP to discover a device you need to have HHTP or HTTPS configured on the device as well as SSH. Refer to - http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_4/guides/getting_start/creatcom.html#wp1057296 . Also refer to the CCP Quick Start Guide at http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/guides/CiscoCPqsg.html
Over all link to CCP documentation is - http://www.cisco.com/en/US/products/ps9422/tsd_products_support_series_home.html
Hope this helps.
Regards
Derek Clothier
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide