cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1363
Views
0
Helpful
1
Replies
Highlighted
Beginner

CCP Communication Protocol - SSH and HTTPS

Hi Gurus,

Do we need to enable HTTPS and SSH both on device, to enable access from CCP? Or only SSH would be enough?

Best Regards,

Ahmed Shahzad.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Hi Ahmed,

     For CCP to discover a device you need to have HHTP or HTTPS configured on the device as well as SSH.  Refer to - http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_4/guides/getting_start/creatcom.html#wp1057296 .  Also refer to the CCP Quick Start Guide at http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/guides/CiscoCPqsg.html

     Over all link to CCP documentation is - http://www.cisco.com/en/US/products/ps9422/tsd_products_support_series_home.html

     Hope this helps.

Regards

Derek Clothier

View solution in original post

1 REPLY 1
Highlighted
Beginner

Hi Ahmed,

     For CCP to discover a device you need to have HHTP or HTTPS configured on the device as well as SSH.  Refer to - http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_4/guides/getting_start/creatcom.html#wp1057296 .  Also refer to the CCP Quick Start Guide at http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/guides/CiscoCPqsg.html

     Over all link to CCP documentation is - http://www.cisco.com/en/US/products/ps9422/tsd_products_support_series_home.html

     Hope this helps.

Regards

Derek Clothier

View solution in original post

Content for Community-Ad