cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1600
Views
0
Helpful
2
Replies

Cisco 891, NAT is to strict, How to open ports for all internal users to access XBOX Live.

richardmcvey
Beginner
Beginner

I need to config a new 891 to allow access to all users, to access XBOX live. Im unable to get the NAT below moderate or route to more than one internal address.                  

2 REPLIES 2

BigDawgFelton
Beginner
Beginner

Does your nat statement have the word "overload" at the end. This actually turns on PAT and allows for multiple devices to be translated to the outside interface.

Sent from Cisco Technical Support iPhone App

Sorry for the delay.

This is a new unit and I dont have experience with the enterprise products. Its seems to work well, just the issues with XBOX Live.

I do have OVERLOAD included in one statement:

 

Router(config)#ip nat inside source list 1 interface FastEthernet 8 overload

but Im still having the issue.

Basically I have 1 ip address on the outgoing port and DHCP on all of the inside ports. I would like for the NAT to be OPEN for all of my users on the needed ports.

 

UDP 53

TCP 53

TCP 80

UDP 88

UDP 3074

TCP 3074

Im just not sure where to start, as the commands I have tried are not working.

Thanks

Rich

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: