07-12-2012 11:11 AM
I need to config a new 891 to allow access to all users, to access XBOX live. Im unable to get the NAT below moderate or route to more than one internal address.
07-12-2012 09:13 PM
Does your nat statement have the word "overload" at the end. This actually turns on PAT and allows for multiple devices to be translated to the outside interface.
Sent from Cisco Technical Support iPhone App
11-08-2012 01:34 PM
Sorry for the delay.
This is a new unit and I dont have experience with the enterprise products. Its seems to work well, just the issues with XBOX Live.
I do have OVERLOAD included in one statement:
Router(config)#ip nat inside source list 1 interface FastEthernet 8 overload
but Im still having the issue.
Basically I have 1 ip address on the outgoing port and DHCP on all of the inside ports. I would like for the NAT to be OPEN for all of my users on the needed ports.
UDP 53
TCP 53
TCP 80
UDP 88
UDP 3074
TCP 3074
Im just not sure where to start, as the commands I have tried are not working.
Thanks
Rich
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide