CISCO-MEMORY-POOL-MIB question

[stephen-cook]

Could anyone tell me what the "Driver text" memory pool is used for and why its memory usage would read 0?  I see it in some of the switch user guides but there is no explanation.

SNMPv2-SMI::enterprises.9.9.48.1.1.1.2.1 = STRING: "Processor"

SNMPv2-SMI::enterprises.9.9.48.1.1.1.2.2 = STRING: "I/O"

SNMPv2-SMI::enterprises.9.9.48.1.1.1.2.16 = STRING: "Driver text“

Thanks in advance,

Stephen

[phiharri]

Greetings Stephen,

The "Driver text" region is used to support dynamically loadable drivers for certain platform components, such as removable flash. It is expected for this memory region to report a low utilisation unless those drivers are in use.

Kind Regards,

/Phil