Cisco Nexus 3548 - NetFlow

[a.aljiledi]

Dears..

i have Cisco Nexus 3548 , and i try to enable netflow or sflow but i get these error

switch(config)# feature sflow
feature sFlow is not supported in this platform

switch(config)# feature netflow
Error: unknown feature

Switch Version

Software
BIOS: version 5.0.0
NXOS: version 9.2(2)
BIOS compile time: 05/22/2018
NXOS image file is: bootflash:///nxos.9.2.2.bin
NXOS compile time: 11/4/2018 21:00:00 [11/05/2018 06:11:06]

Hardware
cisco Nexus3500 C3548P-10GX Chassis

so there is any way to enable sflow or netflow on this product ?.... or any feature provide the same goal...

Any Idea??

Thanks

[Georg Pauwen]

Hello,

it used to be a hardware limitation and apparently still is. Neither the Nexus 3524 nor the Nexus 3548 are sFlow capable, unfortunately...

[balaji.bandi]

Not tested by myself, since Nexus 3K most used in Low Latency environment,  (it was old when i was working with them on 7.X not seen that support)

Interestingly Nexus  OS 9.3 have some enhancement :

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/command/reference/931m3k/config/b_N3K_Config_Commands_93x_n3k/b_N3K_Config_Commands_93x_n3k_chapter_010101.html?bookSearch=true#wp1027752672