03-26-2023 03:49 AM
Hello All,
I want to implement Flexible netflow in our network where all cisco devices will be exporter and Cisco Prime Infrastructure 3.3 as a collector.Assurance license is installed.
But as per the cisco document :
"If your Prime Infrastructure implementation includes Assurance licenses, you must enable data collection via NAMs and NetFlow configurations."
As per the above statement do i really need NAM to collect netflow information on Prime ? If no then how to configure PI as collector ?
Solved! Go to Solution.
03-29-2023 11:16 PM
SOLVED
In the first, you need to configure the end device, but be careful, the port will be 9991
Then prime detected auto that device running NetFlow and prime will working as collector for it
Then you will going to Dashboard / Overview / service assurance , "You will find every thing about the end device that running netflow".
Prime not support live Dashboard included conversation {source ip and Dest Ip , Source Port and Dst port } it not Like PRTG
to get Conversation just you need to create Report (Conversation) .
Steps :
Reports / Reports / Report Launch Pad/Conversation
03-26-2023 05:36 AM
Hi
How interesting! In 2018 someone with the name Chhabi Thapa placed a question here using the exatcly sames words you did.
I am wondering, why did you copy and paste someone else post without changing a coma? And further more, the previous post had a lot of information including the right answer?
But back to the question, the document refers to NAM and say that this is for additional dashlets and not a requirement.
As I netflow collector, you dont need NAM. NAM make sense to monitor machines, if you want to monitor network device, you just need to enable netflow on them.
03-29-2023 11:05 PM
I did this because I faced the same issue, so I did it. If you saw the comments in the last post that were solved by someone sharing a video and the video not working, Thanks for your support.
03-29-2023 11:16 PM
SOLVED
In the first, you need to configure the end device, but be careful, the port will be 9991
Then prime detected auto that device running NetFlow and prime will working as collector for it
Then you will going to Dashboard / Overview / service assurance , "You will find every thing about the end device that running netflow".
Prime not support live Dashboard included conversation {source ip and Dest Ip , Source Port and Dst port } it not Like PRTG
to get Conversation just you need to create Report (Conversation) .
Steps :
Reports / Reports / Report Launch Pad/Conversation
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide