cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
461
Views
0
Helpful
4
Replies

configure snmp version 1 in Cisco N540x

poojaryp1974
Level 1
Level 1

Hi Team,

I want to configure snmp version 1 in cisco N540x router.Please someone help me out.

I coudn't see any document.Can someone please reply me ASAP and it will be really very helpfull.

Thanks,

Prashanth

 

 

4 Replies 4

Ruben Cocheno
Spotlight
Spotlight

@poojaryp1974 

I would probably recommend using v2 if v3 is not something possible, but not v1 at all due below limitations. Config snippet attached below

RubenCocheno_0-1707371425969.png

 snmp-server host 10.50.32.170 version 2c public udp-port 2345
  snmp-server host 10.50.32.170 version 3 auth userV3auth udp-port 2345
  snmp-server host 10.50.32.170 version 3 priv userV3priv udp-port 2345
  snmp-server host 10.50.32.170 version 3 noauth userV3noauth udp-port 2345
  snmp-server user userv2c groupv2c v2c 
  snmp-server user userV3auth groupV3auth v3 auth md5 encrypted 140F0A13 
  snmp-server user userV3priv groupV3priv v3 auth md5 encrypted 021E1C43 priv des56 encrypted 1110001C 
  snmp-server user userV3noauth groupV3noauth v3 LROwner
  snmp-server view view_name 1.3 included
  snmp-server community somethingcomplicated RW 
  snmp-server group groupv2c v2c read view_name
  snmp-server group groupV3auth v3 auth read view_name
  snmp-server group groupV3priv v3 priv read view_name
  snmp-server group groupV3noauth v3 noauth read view_name

https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5xx/system-management/75x/b-system-management-cg-75x-ncs540/implementing-snmp.html#con_1048216

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

Hello,

not sure what you are looking for...you can specify v1 with any of the available SNMP commands. What are you running into ?

Hi George,

Thanks for emailing me.I am looking for the entire command to run snmp
version 1 in Cisco N540x router. It will be helpful for me.

Thanks,
Prashanth

balaji.bandi
Hall of Fame
Hall of Fame

SNMPv1 is not suggested as security practice better to move to SNMPv2 or higher (i prefer to have SNMPv3 for security reason).

configuration document :

https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5xx/system-management/75x/b-system-management-cg-75x-ncs540/implementing-snmp.html

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Review Cisco Networking for a $25 gift card