Connect two SVI with Different Subnet

[Faresnani]

I have this topology with two SVI with Different Subnet, how to connect them together?

[Faresnani]

there's no ACL

the problem is that from Server (192.168.10.10) I can ping the GW (172.18.1.254) but I can not ping the SW-Client (172.18.1.252)

[Jon Marshall]

I understand the problem, just making suggestions as to what could be the issue. 

You diagram shows 172.18.1.253 as the switch IP but you keep referring to 172.18.1.252, is that a typo ? 

Can the router ping the switch and can the switches ping each other ? 

Jon

[Faresnani]

thank you for your patience, 

oh sorry its  typo 

yes the router can ping both switches, but the switches cant ping each other

[Jon Marshall]

Can you post full confihguration of the router and both switches and indicate which port on each switch connects to the router. 

Jon

[MHM Cisco World]

in Client SW check if you enable or not ip routing.

[Faresnani]

I have the Router to make the Routing, 

I want to manage and telnet the Client Sw from server-side 

[MHM Cisco World]

your PC VM connect is red so I think that VMware not work.

can you ping from PC to GW?

[MHM Cisco World]

Replace servet with pc ping success 

This may becuase defualt gw is missing when config server 

Ping not success to svi

Sw need  ip default gateway x.x.x.x