11-29-2023 06:27 PM
Hello All,
New to network, got this error message on our backup Job in Prime and not sure if there is a work around or fix for this. Nothing was changed on the backup config so not sure what was the trigger. It does say wrong value.
"Exception during ConfigBackup: (IP Address). MEDIATION-7,FileTransferConfigOptions (IP Address),downloadDataType,Bad value for downloadDataType in FileTransferConfigOptions[3008005_(IP Address)]: Wrong value"
Thanks for the help
11-29-2023 11:47 PM
- What controller model and software version ? What version of Cisco Prime are you using ?
M.
11-30-2023 02:53 AM
1. i would check the remote IP address accessble
2. Do you have enough space
check below document can guide you :
https://mrncciew.com/2014/01/12/wlc-config-backup-using-prime/
12-03-2023 05:18 PM
Hello Balaji,
Thanks for the help. Will look into this link you provided.
Best Regards,
Enrico
12-05-2023 01:04 AM
Hello,
I am trying to download running config file of AIR-CT2504-K9 8.0.115.0 via snmp to tftp server but getting following error:
Error in packet.
Reason: noCreation (That table does not support row creation or that object can not ever be created)
Any ideas ?
12-05-2023 02:38 AM
>I am trying to download running config file of AIR-CT2504-K9 8.0.115.0 via snmp to tftp server but getting following error:
Not supported ,
M.
12-05-2023 06:28 AM
Thank You,
is it not supported by this model or software version ?
12-05-2023 06:35 AM
- The intended backup via snmp method is not supported in general on aireos based controllers ,
M.
12-05-2023 07:30 AM
May be uplift the code or use what available is best approach.
12-05-2023 04:36 AM
via SNMP - not that i know that works.
Try different mode suggested on the document.
12-05-2023 06:26 AM
Hi,
thank You so much for Your response. Following that: "mode suggested on the document" - can You elaborate ? Especially what document ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide