04-24-2013 10:09 AM
I'm currently sending SNMP to multiple hosts. I have utilized the EEM to create custom traps following the guidance provided here:
https://supportforums.cisco.com/docs/DOC-11745
If possible I would like to send the custom traps to only one of the SNMP hosts that I am sending standard traps to. The applet seems to send traps to all hosts regardless of what trap types are configured in the snmp-server host command. Is there a way to configure the custom traps to be sent to only one of the multiple hosts I have configured?
Solved! Go to Solution.
04-24-2013 11:24 AM
No, this is not possible. The traps will be sent to all configured hosts as they are injected into the SNMP subsystem as opposed to being sent directly from EEM.
04-24-2013 11:42 AM
Those traps will only be sent to hosts with event-manager traps configured.
04-24-2013 11:24 AM
No, this is not possible. The traps will be sent to all configured hosts as they are injected into the SNMP subsystem as opposed to being sent directly from EEM.
04-24-2013 11:41 AM
If instead of utilizing custom traps I utlized the following:
action label snmp-trap intdata1 integer
would the same be true or would I be able to specify which host the traps are sent to via the notification-type parameter in the host command?
snmp-server host ip address version 3 noauth username event-manager
04-24-2013 11:42 AM
Those traps will only be sent to hosts with event-manager traps configured.
04-24-2013 11:49 AM
Ok...thanks for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide