08-18-2011 12:05 AM
Hi,
I am using LMS version 3.2 and i am not able to generate EOS/EOL report with error no connection to Cisco.
Saw an update i LMS portal as this:
so upgraded the patch cwcs33x-win-CSCto46927-0.zip and restarted the demeon as read in the read me file for the patch.
Now the job execution status is always shows running, its neither fail nor pass.
Why is this like so ?? files attached...
Any inputs ???
Thanks
Richard
08-18-2011 12:47 AM
Hi,
Try to increase the Fetch Interval as below :
1) Go to RME->Admin Inventory Cisco.com Fetch Interval 2) Change the fetch frequency to 1 hr. 3) Run a EOS/EOL hardware job
I hope this will help..
In case the job failed again , please enable the debugging for INVREPORTS (RME >admin
>system preference >application log level settings)
Re-run the job and send me the Invreports.log(NMSROOT\log)
Thanks
Afroj
08-18-2011 12:50 AM
Hi,
There are few bugs becasue of the following exception that filed in LMS 3.2 and fixed in LMS 3.2.1
Exceptions found :-
EOS_EOL reportcom.cisco.nm.rmeng.inventory.reports.util.IRException: Cisco.com Exception
at com.cisco.nm.rmeng.inventory.reports.datagenerators.EOS_EOL_RDG.getData(EOS_EOL_RDG.java:234)
at com.cisco.nm.rmeng.inventory.reports.datagenerators.DataGenRequestHandler.getData(DataGenRequestHandler.java:44)
at com.cisco.nm.rmeng.inventory.reports.job.JobExecutor.generateReportData(JobExecutor.java:1693)
at com.cisco.nm.rmeng.inventory.reports.job.JobExecutor.runReport(JobExecutor.java:894)
at com.cisco.nm.rmeng.inventory.reports.job.JobExecutor.main(JobExecutor.java:2514)
[ Thu Aug 04 11:56:20 IST 2011 ],ERROR,[main],com.cisco.nm.rmeng.inventory.reports.job.JobExecutor,generateReportData,1709,IRException throwncom.cisco.nm.rmeng.inventory.reports.util.IRException: Cisco.com Exception
at com.cisco.nm.rmeng.inventory.reports.datagenerators.EOS_EOL_RDG.getData(EOS_EOL_RDG.java:283)
at com.cisco.nm.rmeng.inventory.reports.datagenerators.DataGenRequestHandler.getData(DataGenRequestHandler.java:44)
at com.cisco.nm.rmeng.inventory.reports.job.JobExecutor.generateReportData(JobExecutor.java:1693)
at com.cisco.nm.rmeng.inventory.reports.job.JobExecutor.runReport(JobExecutor.java:894)
at com.cisco.nm.rmeng.inventory.reports.job.JobExecutor.main(JobExecutor.java:2514
BUGS :-
1> CSCta76147
2> CSCta76147
Upgrade LMS 3.2 to LMS 3.2.1 and it should be fix
Note :- kindly take backup of CiscoWorks before any upgrade. Also you need to make sure that RME should be running 4.3.1 and Campus Manager should be 5.2.1
here is the location to download LMS 3.2.1
Many Thanks,
Gaganjeet
08-18-2011 12:51 AM
Hi,
Opps we reply to same thread. Kindly try Afroz troubleshooting steps first
Many Thanks,
Gaganjeet
08-22-2011 03:17 AM
Hi Afroj,
I have set the fetch interval to 1 hr and 7 days also. But the job status continuous to be running, its not wind up in pass or fail and i am not receiving the mail alerts.
Enabled the debugging for inventry reports and collected the logs... please find the attched....
08-24-2011 03:47 AM
HI All ,
Please find the attached Software update details .
The started job is not getting failed its continuously running for 1 weeks .
Did anyone had come across similar issues
Regards
Angus
08-25-2011 02:15 PM
Hi Angus,
As Gaganjeet suggested, try upgarding the LMS from 3.2 to LMS 3.2.1
I hope this will take care of the issue.
Thanks
Afroj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide