How to determine if the "AX license feature" is enabled on a Cisco CSR 1000V bought from the AWS marketplace

[john.fontanilla]

Hi,

We use the following AMI right now:

cisco-ic_CSR_03.16.01a.S-AMI-AX-HVM-9f5a4516-a4c3-4cf1-89d4-105d2200230e-ami-77397b1d.3 (ami-009ecb6a)

Based on the above AMI, is there a way to determine if it has the AX license (we assume it's there because of the name) and if the AX license is enabled?

JohnF

[Philip D'Ath]

If you go "show ver" it should have a section labelled "Technology Package License Information", and that should show the activated licences.

[john.fontanilla]

Phil,

Thanks for the reply. After running "show ver" on the command line, the section "Technology Package License Information" doesn't appear at all. Here's a partial output of "show ver":

Cisco IOS XE Software, Version 03.16.01a.S - Extended Support Release
Cisco IOS Software, CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.5(3)S1a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 04-Nov-15 12:09 by mcpre

...

License Level: ax
License Type: Default. No valid license found.
Next reload license Level: ax

cisco CSR1000V (VXE) processor (revision VXE) with 1868623K/6147K bytes of memor y.
Processor board ID XXXXXXXXXXX (changed so the id is not in the public forum)
1 Gigabit Ethernet interface
32768K bytes of non-volatile configuration memory.
3795192K bytes of physical memory.
7774207K bytes of virtual hard disk at bootflash:.

Configuration register is 0x2102

Does the output above confirm it has the "ax" license?

JohnF

[Philip D'Ath · Accepted solution]

Yes, that confirms it has the AX licence.