04-26-2006 06:35 AM
All of my AP's are showing up as "Devices for which Inventory has never been collected ". Why is this?
04-26-2006 06:36 AM
It could be that they are not supported.
What is the sysObjectID of the AP's?
04-26-2006 06:47 AM
I have AP350's and AP1200's...
RFC1213-MIB::sysDescr.0 = STRING: "Cisco Internetwork Operating System Software ..IOS (tm) C350 Software (C350-K9W7-M), Version 12.2(13)JA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)..TAC Support: http://www.cisco.com/tac..Copyright (c) 1986-2003 by cisco Systems, Inc...Compiled Fri 14-Nov-0"
RFC1213-MIB::sysObjectID.0 = OID: CISCO-PRODUCTS-MIB::ciscoAirAp350IOS
RFC1213-MIB::sysDescr.0 = STRING: "Cisco Internetwork Operating System Software ..IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)..Technical Support: http://www.cisco.com/techsupport..Copyright (c) 1986-2004 by cisco Systems, Inc...Compi"
RFC1213-MIB::sysObjectID.0 = OID: CISCO-PRODUCTS-MIB::ciscoAIRAP1210
04-26-2006 06:56 AM
Both ciscoAirAp350IOS (1.3.6.1.4.1.9.1.552) and ciscoAIRAP1210 (1.3.6.1.4.1.9.1.525) are supported in your version.
What error message (if any) do you get when you try to collect their inventory?
04-26-2006 07:41 AM
What error message (if any) do you get when you try to collect their inventory?
I am new to 2.5.1 and I do not see how to do this. I am also looking for Check Device Attributes.
04-26-2006 07:44 AM
RME -> Devices -> Inventory -> Inventory Jobs -> Create
Select the AP's and run the job
04-26-2006 07:49 AM
when I go to: RME -> Devices -> Inventory -> Inventory Jobs -> it sends me to this URL:
http://X.X.X.X:1741/rme/ICSJobBrowser.do
but the page never loads.
04-26-2006 07:56 AM
Looks like there are other issues to address then.
Sorry, not sure what could cause this.
04-27-2006 10:23 AM
i was able to run the collection and they all failed with one of the 3 reasons listed below.
-Device sensed, but collection failed
-Transport session to device failed. Cause: Authentication failed on device.
-Device Collection Failed
05-18-2006 03:38 PM
I had a similar problem with 1200 aps. Upgraded the IOS to 123-4 & the inventory is now working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide