cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1690
Views
0
Helpful
5
Replies
Beginner

LMS 4.0 ERROR PERFORMING SNMP OPERATION

Hi,

I am using LMS 4.0 and I keep encountering this issue "Error performing SNMP Operation"

Anyone know how to resolve this?

Regards
Wei An

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

LMS 4.0 ERROR PERFORMING SNMP OPERATION

SNMP V3?

Enable read/write

Cheers,

Michel

View solution in original post

5 REPLIES 5
Highlighted
Rising star

LMS 4.0 ERROR PERFORMING SNMP OPERATION

SNMP V3?

Enable read/write

Cheers,

Michel

View solution in original post

Highlighted
Beginner

LMS 4.0 ERROR PERFORMING SNMP OPERATION

Hi Michel,

My SNMP v3 configuration is as follow:

snmp-server group spfadmin v3 auth

snmp-server view spfadminview internet.* included

snmp-server trap-source Vlan79

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps transceiver all

snmp-server enable traps call-home message-send-fail server-fail

snmp-server enable traps tty

snmp-server enable traps eigrp

snmp-server enable traps ospf state-change

snmp-server enable traps ospf errors

snmp-server enable traps ospf retransmit

snmp-server enable traps ospf lsa

snmp-server enable traps ospf cisco-specific state-change nssa-trans-change

snmp-server enable traps ospf cisco-specific state-change shamlink interface-old

snmp-server enable traps ospf cisco-specific state-change shamlink neighbor

snmp-server enable traps ospf cisco-specific errors

snmp-server enable traps ospf cisco-specific retransmit

snmp-server enable traps ospf cisco-specific lsa

snmp-server enable traps flex-links status

snmp-server enable traps fru-ctrl

snmp-server enable traps entity

snmp-server enable traps ether-oam

snmp-server enable traps flash insertion removal

snmp-server enable traps l2tc threshold sys-threshold

snmp-server enable traps power-ethernet police

snmp-server enable traps cpu threshold

snmp-server enable traps rep

snmp-server enable traps vtp

snmp-server enable traps vlancreate

snmp-server enable traps vlandelete

snmp-server enable traps auth-framework sec-violation

snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan

snmp-server enable traps envmon fan shutdown supply temperature status

snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail

snmp-server enable traps port-security

snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config

snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up

snmp-server enable traps ethernet cfm alarm

snmp-server enable traps ethernet evc status create delete

snmp-server enable traps energywise

snmp-server enable traps rtr

snmp-server enable traps bgp

snmp-server enable traps bulkstat collection transfer

snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency

snmp-server enable traps config-copy

snmp-server enable traps config

snmp-server enable traps config-ctid

snmp-server enable traps event-manager

snmp-server enable traps hsrp

snmp-server enable traps ipmulticast

snmp-server enable traps isis

snmp-server enable traps msdp

snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message

snmp-server enable traps rf

snmp-server enable traps bridge newroot topologychange

snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency

snmp-server enable traps syslog

snmp-server enable traps errdisable

snmp-server enable traps vlan-membership

snmp-server enable traps mac-notification change move threshold

snmp-server host 173.24.79.21 vrf vrf_MGT informs version 3 auth admin

snmp-server host 173.24.79.21 vrf vrf_MGT password

snmp ifmib ifindex persist

Any idea where I went wrong?

Highlighted
Rising star

LMS 4.0 ERROR PERFORMING SNMP OPERATION

Not all SNMP info is shown in config. "show snmp ?" shows more.

By default you define only a read view. See extract below on how to define a write view.

Cheers,

Michel

snmp-server group

To configure a new Simple Network Management Protocol (SNMP) group, or a table that maps SNMP users to SNMP views, use the snmp-server group command in global configuration mode. To remove a specified SNMP group, use the no form of this command.

snmp-server group group-name {v1 | v2c | v3 {auth | noauth | priv}} [read read-view]  [write write-view] [notify notify-view] [access access-list]

no snmp-server group group-name {v1 | v2c | v3 {auth | noauth | priv}}

Syntax Description


group-name

Specifies the name of the group.

v1

Sets the least secure of the possible SNMP security models.

v2c

Sets the second least secure of the possible SNMP security models. It  allows for the transmission of informs and counter 64, which allows for  integers twice the width of what is normally allowed.

v3

Sets the most secure of the possible SNMP security models.

auth

Specifies authentication of a packet without encrypting it.

noauth

Specifies no authentication of a packet.

priv

Specifies authentication of a packet with encryption.

read read-view

(Optional) Specifies a read view. The read-view argument represents a string (not to exceed 64 characters) that is the  name of the view that enables you to view only the contents of the  agent.

write write-view

(Optional) Specifies a write view. The write-view argument represents a string (not to exceed 64 characters) that is the  name of the view that enables you to enter data and configure the  contents of the agent.

notify notify-view

(Optional) Specifies a notify view. The write-view argument represents a string (not to exceed 64 characters) that is the  name of the view that enables you to specify a notify, inform, or trap.

access access-list

(Optional) Specifies a standard access list. The access-list argument  represents an integer from 1 to 99 that specifies a standard access  list of IP addresses or a string (not to exceed 64 characters) that is  the name of a standard access list of IP addresses.

Highlighted
Beginner

LMS 4.0 ERROR PERFORMING SNMP OPERATION

Hi mic,

did the read/write access but still getting the same error.

Here are my commands

#show run

snmp-server group admin v3 auth read admin write admin notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F

snmp-server community admin RW

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart

snmp-server enable traps transceiver all

snmp-server enable traps call-home message-send-fail server-fail

snmp-server enable traps tty

snmp-server enable traps eigrp

snmp-server enable traps ospf state-change

snmp-server enable traps ospf errors

snmp-server enable traps ospf retransmit

snmp-server enable traps ospf lsa

snmp-server enable traps ospf cisco-specific state-change nssa-trans-change

snmp-server enable traps ospf cisco-specific state-change shamlink interface-old

snmp-server enable traps ospf cisco-specific state-change shamlink neighbor

snmp-server enable traps ospf cisco-specific errors

snmp-server enable traps ospf cisco-specific retransmit

snmp-server enable traps ospf cisco-specific lsa

snmp-server enable traps flex-links status

snmp-server enable traps fru-ctrl

snmp-server enable traps entity

snmp-server enable traps ether-oam

snmp-server enable traps flash insertion removal

snmp-server enable traps l2tc threshold sys-threshold

snmp-server enable traps power-ethernet police

snmp-server enable traps cpu threshold

snmp-server enable traps rep

snmp-server enable traps vtp

snmp-server enable traps vlancreate

snmp-server enable traps vlandelete

snmp-server enable traps auth-framework sec-violation

snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan

snmp-server enable traps envmon fan shutdown supply temperature status

snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail

snmp-server enable traps port-security

snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config

snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up

snmp-server enable traps ethernet cfm alarm

snmp-server enable traps ethernet evc status create delete

snmp-server enable traps energywise

snmp-server enable traps rtr

snmp-server enable traps bgp

snmp-server enable traps bulkstat collection transfer

snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency

snmp-server enable traps config-copy

snmp-server enable traps config

snmp-server enable traps config-ctid

snmp-server enable traps event-manager

snmp-server enable traps hsrp

snmp-server enable traps ipmulticast

snmp-server enable traps isis

snmp-server enable traps msdp

snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message

snmp-server enable traps rf

snmp-server enable traps bridge newroot topologychange

snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency

snmp-server enable traps syslog

snmp-server enable traps errdisable

snmp-server enable traps vlan-membership

snmp-server enable traps mac-notification change move threshold

snmp-server host 174.24.79.21 vrf vrf_MGT version 3 auth admin snmp-server group admin v3 auth read admin write admin notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
snmp-server community admin RW
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps transceiver all
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps eigrp
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
snmp-server enable traps ospf cisco-specific state-change shamlink interface-old
snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps flex-links status
snmp-server enable traps fru-ctrl
snmp-server enable traps entity
snmp-server enable traps ether-oam
snmp-server enable traps flash insertion removal
snmp-server enable traps l2tc threshold sys-threshold
snmp-server enable traps power-ethernet police
snmp-server enable traps cpu threshold
snmp-server enable traps rep
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps auth-framework sec-violation
snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail
snmp-server enable traps port-security
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps ethernet cfm alarm
snmp-server enable traps ethernet evc status create delete
snmp-server enable traps energywise
snmp-server enable traps rtr
snmp-server enable traps bgp
snmp-server enable traps bulkstat collection transfer
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps ipmulticast
snmp-server enable traps isis
snmp-server enable traps msdp
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps rf
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
snmp-server enable traps syslog
snmp-server enable traps errdisable
snmp-server enable traps vlan-membership
snmp-server enable traps mac-notification change move threshold
snmp-server host 174.24.79.21 vrf vrf_MGT version 3 auth admin

#show snmp user

User name: admin

Engine ID: 800000090300503DE55569FF

storage-type: nonvolatile        active

Authentication Protocol: SHA

Privacy Protocol: None

Group-name: admin

Highlighted
Beginner

LMS 4.0 ERROR PERFORMING SNMP OPERATION

Anyone ?

CreatePlease to create content
Content for Community-Ad