cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1160
Views
5
Helpful
2
Replies
Ian Beck
Beginner

LMS 4.2.2 Device Interface Monitoring

HI,

On LMS 3.2 there was a way to disable the monitoring of Device Interfaces.

Examples are ISDN30 Channels, which go up and down during calls. I could disable the channel monitor on the relevant device and only monitor the Circuit as this is the main device to monitor.

I can not find the same option in 4.2.2

Could some provide the link.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
gudvardur
Beginner

Monitor -> Fault settings -> Setup -> Fault Device Details

From there you select the device you want do modify.

To be more precise...

https://yourservername/dfm/deviceReports.do?navid=DDV_Asset

View solution in original post

2 REPLIES 2
gudvardur
Beginner

Monitor -> Fault settings -> Setup -> Fault Device Details

From there you select the device you want do modify.

To be more precise...

https://yourservername/dfm/deviceReports.do?navid=DDV_Asset

Many thanks