cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1646
Views
0
Helpful
4
Replies

n5k and n7k config questions

Nell_Ko
Beginner
Beginner

Greetings!

 

I have few questions regarding n5k and n7k configurations.

First I have 2 sets of n5k and 1 set of n7k and  their os vers are below

model : n5k-c5548

Os : 7.0(8)N1(1)

       5.0(3)N1(1c)

model n7k-c7710

Os : 6.2(16)

 

Now I have questions about command lines for n5k and n7k

I know that those 4 commands below are from IOS to disable certain services,

but I do not know whether n5k and n7k have those same commands.

If n5k and n7k do have the commands please let me know :(

or

if n5k and n7k not have the commands, then please tell me where I can find the documents about it.

A. no ip http server

B. no ip http secure-server

C. no ip bootp serber

D. no service pad

 

 

Thanks,

Nell

 

1 Accepted Solution

Accepted Solutions

Mark Malone
Mentor
Mentor
Hi
Its different in NX-OS first you turn on a feature to get it , so http its just no enabled by default unless you enable it first though feature section like below , the command guide online for each release software guide contains all commands and syntax , where you download the images

(config)# feature h?
hsrp Enable/Disable Hot Standby Router Protocol (HSRP)
http-server Enable/Disable http-server

No boot its not supported only DHCP or service pad , service pad is x25 legacy

View solution in original post

4 Replies 4

Mark Malone
Mentor
Mentor
Hi
Its different in NX-OS first you turn on a feature to get it , so http its just no enabled by default unless you enable it first though feature section like below , the command guide online for each release software guide contains all commands and syntax , where you download the images

(config)# feature h?
hsrp Enable/Disable Hot Standby Router Protocol (HSRP)
http-server Enable/Disable http-server

No boot its not supported only DHCP or service pad , service pad is x25 legacy

i did typed "feature ?" on n5k
but i dont see http-server.
Does this mean that Cisco has disabled and removed the function?

Hi
no thats off my 5ks its there on this image anyway , not in my 7ks though

sh ver | i n5000
kickstart image file is: bootflash:///n5000-uk9-kickstart.7.3.3.N1.1.bin
system image file is: bootflash:///n5000-uk9.7.3.3.N1.1.bin

Thanks!

 

I wasn't so familiar with nexus series :(

I realized that i have to check the os version of the nexus before checking certain command.

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers