n5k and n7k config questions

[Nell_Ko]

Greetings!

I have few questions regarding n5k and n7k configurations.

First I have 2 sets of n5k and 1 set of n7k and  their os vers are below

model : n5k-c5548

Os : 7.0(8)N1(1)

       5.0(3)N1(1c)

model n7k-c7710

Os : 6.2(16)

Now I have questions about command lines for n5k and n7k

I know that those 4 commands below are from IOS to disable certain services,

but I do not know whether n5k and n7k have those same commands.

If n5k and n7k do have the commands please let me know :(

or

if n5k and n7k not have the commands, then please tell me where I can find the documents about it.

A. no ip http server

B. no ip http secure-server

C. no ip bootp serber

D. no service pad

Thanks,

Nell

[Mark Malone · Accepted solution]

Hi
Its different in NX-OS first you turn on a feature to get it , so http its just no enabled by default unless you enable it first though feature section like below , the command guide online for each release software guide contains all commands and syntax , where you download the images

(config)# feature h?
hsrp Enable/Disable Hot Standby Router Protocol (HSRP)
http-server Enable/Disable http-server

No boot its not supported only DHCP or service pad , service pad is x25 legacy

[Nell_Ko]

i did typed "feature ?" on n5k
but i dont see http-server.
Does this mean that Cisco has disabled and removed the function?

[Mark Malone]

Hi
no thats off my 5ks its there on this image anyway , not in my 7ks though

sh ver | i n5000
kickstart image file is: bootflash:///n5000-uk9-kickstart.7.3.3.N1.1.bin
system image file is: bootflash:///n5000-uk9.7.3.3.N1.1.bin

[Nell_Ko]

Thanks!

I wasn't so familiar with nexus series :(

I realized that i have to check the os version of the nexus before checking certain command.