Need the Cisco DOC about NAM

[kevintang]

Hi, I have a Cisco network analysis module.

I want configure it as net flow collector. Can some one give the document how to configure it?

I could not find it in Cisco web site.

Any help?

Regards

[paddyxdoyle]

Hi,

Have a look at the following document, it mentions enabling the Netflow montor option on the NAM and also shows you how to configure your L3 device to use the NAM as a netlow collector.

http://www.cisco.com/en/US/products/hw/switches/ps708/products_command_reference_chapter09186a00801fadb3.html

HTH

Paddy

[rmushtaq]

See the NAM Deployment Guide: http://www.cisco.com/en/US/products/hw/modules/ps2706/products_implementation_design_guide09186a00801a75ac.html

[kevintang]

Hi, Thanks for your information.

I am using Cisco 2651XM with NAM. It's a little bit different from 6550/7600 device. Is there more specific NAM DOC with low end devices?

Anyway, I will it in my lab.

Regards

Kevin

[nhabib]

Perhaps this will help:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00801d6096.html

[kevintang]

Thanks for this information. I have read this DOC before. It's the most help DOC in Cisco web site for my situation.

But you will find out there is not much details about configuring the NAM as Netflow collector or attache it to the SPAN port.

Regards

Kevin