Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have installed xrv9k-fullk9-x.vrr.vga-6.4.1.iso on my ESXi6.0 host. The install process did OK, no error message. But I continually see this error message in the device. "%OS-SYSMGR-3-ERROR:dp_launcher(1) exited, will be respawned with a delay ...
Hello, everyone
I am testing the PPPoE DDR function using CSR1000V
PPPoE DDR (Client) <=========> PPPoE (server)
Here is my current configuration based on IOS-XE CSR 1000V
Without “dial-on-demand”, It works fine. I can see the D1 interface get IP add...
Hi, I failed install CUCM 9.1 on VM ESXi 4.1 server. following this link, I have got the install log file. http://docwiki.cisco.com/wiki/How_to_Dump_Install_Logs_to_the_Serial_Port_of_the_Virtual_MachineI have followed the instrution and attached a n...
From this out put, you can see one g711ulaw call use 15 credits, but other 2 calls use 22 credits, why?router1#sh voice dsp group allDSP groups on slot 0:dsp 1:State: UP, firmware: 26.8.0Max signal/voice channel: 32/32Max credits: 480num_of_sig_chnls...
Hi, I got error when upgrade CUCM from 8.5 to 8.6. in the log file it ask Examine /common/log/install/capture.txt for failure.My queston: how to view/get this capture.txt file?09/09/2011 15:31:24 refresh_upgrade|Checksum failed (1). Examine /common/l...
Hi, Ronit
Have you got the PPPoE DDR working?
After I add "dial-on-demand", it does not working any more.
----------config as follow-----------------
interface GigabitEthernet3 no ip address negotiation auto pppoe enable group global pppoe-client dia...
I think you need upgrade CUCM 7.1.5 to 8.5(1)SU5 first. then virtualize CUCM 8.5(1)SU5. last, you can upgrade CUCM 8.5(1)SU5 to CUCM 9.1.http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/elmuserguide/9_1_1/license_migration/CUCM_BK_CBF8B56A_00_cucm-...
thanks for all your guys reply. I believe the problem is on CUCM 9.1.1.20000-5 version too. I have successfully installed the CUCM8.6.2 on the same server with VM esxi 4.1. I will try do the upgrade to CUCM 9.1.1.20000-5 and see whether sucessful or ...
