03-19-2012 04:40 AM
I would like to run some NetFlow monitoring on a few sub interfaces on a router. This is a 7301, with an NPE-G1.
What I want to know is, does Cisco have a page anywhere (because I can't find one) that lists typical additional CPU and memory loads one can expect when enabling NetFlow on an (sub)-interface; perhaps for a given speed (Mbps) and/or number of flows?
I don't want to enable NetFlow and then bring the device to a grinding halt, how can I know what sort of overhead to expect?
Solved! Go to Solution.
03-19-2012 01:14 PM
Here's one that included the 7301, for example:
http://www.cisco.com/en/US/technologies/tk543/tk812/technologies_white_paper0900aecd802a0eb9.html
03-19-2012 01:14 PM
Here's one that included the 7301, for example:
http://www.cisco.com/en/US/technologies/tk543/tk812/technologies_white_paper0900aecd802a0eb9.html
03-30-2012 08:59 AM
This is a good resrouce, thakns for the link
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide