10-31-2017 07:18 AM - edited 03-01-2019 06:13 PM
Hello all,
LMS 4.1 had a lovely feature (netshow commands), that helped us perform daily routine tasks. Currently we are running PI 3.2 (express plus). Is there a similar tool in PI 3.2.
We want to run a simple command daily on our routers, to check some routing issues. Is there a way to accomplish this via PI?
Thank you in advance,
Katerina
Solved! Go to Solution.
11-01-2017 08:27 AM
what you can use as a workaround....
create a config template and use the following (as an example)...
do show interface status
afterwards deploy the template and check the results in the job details
05-26-2019 04:05 PM
You could also use the following format in a configuration CLI template, for example:
#MODE_ENABLE
show command(s) here
#MODE_END_ENABLE
I have tested this and works fine in our Prime Infrastructure 3.4 server..
Regards..
10-31-2017 09:16 AM
(Afraid there's still no netshow)
M.
11-01-2017 03:50 AM
Thank you for the reply!
It is such a pity that the best features of LMS are not included in PI!
11-01-2017 08:27 AM
what you can use as a workaround....
create a config template and use the following (as an example)...
do show interface status
afterwards deploy the template and check the results in the job details
11-02-2017 07:36 AM
Great idea!
Thank you very much! At least I can do something with the product!
05-26-2019 04:05 PM
You could also use the following format in a configuration CLI template, for example:
#MODE_ENABLE
show command(s) here
#MODE_END_ENABLE
I have tested this and works fine in our Prime Infrastructure 3.4 server..
Regards..
05-27-2019 03:31 AM
Hi!
Thank you for the info. It works perfectly
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide