04-23-2019 09:24 AM - edited 04-23-2019 06:40 PM
Hello sir,
I have made a topology:
Router(Router's Static IP 192.168.1.2) DHCP enabled(192.168.1.3 to 192.168.1.150) -> L2 Switch(192.168.1.1) -> PC.
Now issue is that sometimes signal drops on user end.
Can anyone suggest me if any change requires in IP configuration of router or switch?
I have attached network diagram also.
04-23-2019 09:42 AM
Hi @yogenderrohilla2408 ,
Could you tell us what kind of tests you are doing?
Maybe sharing some diagram of your network could be useful too.
Regards
04-23-2019 06:43 PM
04-23-2019 11:55 AM
04-23-2019 06:46 PM
04-24-2019 12:27 AM
Many reasons, why it dropped.
1.May be internet side
2. may be router side
3. may be Switch side
4. may be user side.
This required and need to diagnosis the problem in each level of network. that is the reason NMS take advantage here to monitor things.
04-24-2019 12:49 AM
Have you considered maybe changing the subnet? Instead of using 192 maybe use something else in your IP settings page
04-24-2019 12:01 AM - edited 04-24-2019 12:02 AM
Please ask your instructor/professor for guidance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide