cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2186
Views
10
Helpful
4
Replies

NEXUS 5000: read CPU Load with SNMP

ylvie3434
Beginner
Beginner

Hallo,

tried to read the NEXUS 5000 cpu load:

cseSysCPUUtilization 1.3.6.1.4.1.9.9.305.1.1.1

but there is a  timeout:

Timeout: No Response from 10.100.224.16

Other MIB values readout, like the system value, is ok.

We use snmpv3.

Thanks

ylvie

4 Replies 4

AFROJ AHMAD
Cisco Employee
Cisco Employee
Hi Ylvie,

There are a few sources for CPU utilisation values from SNMP, the classic ones from CISCO-PROCESS-MIB: cpmCPUTotal5secRev     1.3.6.1.4.1.9.9.109.1.1.1.1.6 cpmCPUTotal1minRev     1.3.6.1.4.1.9.9.109.1.1.1.1.7 cpmCPUTotal5minRev      1.3.6.1.4.1.9.9.109.1.1.1.1.8 And a new source in CISCO-SYSTEM-EXT-MIB, cseSysCPUUtilization (1.3.6.1.4.1.9.9.305.1.1.1). Unlike the averaged values from CISCO-PROCESS-MIB, cseSysCPUUtilization returns an un-smoothed value and typically shows more erratic results.so  I would recommended the objects from CISCO-PROCESS-MIB
ie. cpmCPUTotal5secRev instead.

Thanks
Afroj
Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

thank you Afroj, it works

Hi Ylvie,

Thanks for the update.

If this post answers your question, please click the "Correct Answer" button"

Thanks

Afroj

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

can't find the "Correct Answer" button...sorry

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: