pdshow command doesn't work

[ruben.montes]

Hello,

I have problems stopping the Ciscoworks services. The dmgtd stop doesn't work well and pdshow doesn't work.

It's a new LMS2.2 installation coming from a 2.2 to 2.5 upgrade, uninstallation of 2.5 and installation of 2.2.

Any idea??

[shijuvjoseph]

hi...

infact the command to stop Ciscoworks services is not dmgtd try this command instead

'net stop crmdmgtd' this will stop the ciscoworks services ,and try 'pdshow |more ' command from the Ciscoworks install folder..assuming u r running Ciscoworks on a windows server..

cheers

shiju..

[ruben.montes]

Sorry,

it's a Solaris 2.8

[yjdabear]

I have a similar problem ("dmgtd stop" timing out) on a particular lab box, after RME 3.5 IDU 10 and CM 3.3 IDU 10 on LMS 2.2. Here's a not-very-elegant workaround I used to get IDUs 11 installed, may or may not suit your purpose:

- temporarily disable "/etc/rc3.d/S10dmgtd" (and "/etc/rc3.d/S93ipm", if you have RWAN 1.x) by renaming it to something else

- reboot your box

- do whatever you need to do with dmgtd stopped here

- when finished, reinstate "/etc/rc3.d/S10dmgtd" (and "/etc/rc3.d/S93ipm")

- reboot your box again

[nhabib]

Any error messages in /var/adm/CSCOpx/log/daemons.log ?