Prime infrastructure 3.2 , non-cisco device monitoring

[networkexpert]

Dears ,
I am trying to add Brocade switches to cisco Prime infrastructure 3.2
I have verified the provided credential for CLI and SNMP and also I can ping form the switch to Prime .
once added and sync , I received "SNMP Connectivity Failed"

please advise

[balaji.bandi]

Firstly i would check the model in compatability list.

Seconds, check the SNMP config on broacade side.

If you have windows, download snmplwalk and try config broacade IP make sure you have snmpwalk working with snmp credentials, if all working then try same setting on prime.

or check the Logs why it failing ?

[networkexpert]

Thanks for your update 

please check the attached image , confirmed the SNMP credential  is verified

can you please advise how to check the compatibility?

[balaji.bandi]

here is compatability matrix to check.

https://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html