Privilege 5 access show running-config not working

[BrianPersaud]

Hi All

I have show running-config working with privPrivilege 5 5 on all of our switches except one particular IOS version.  Wanted to know if anyone encountered this issue as well.  When I do the show run view full the output is blank.

Here is the output of the commands:

switch1#show running-config view full
switch1#show running-config
switch1#

username test5 privilege 5 secret 5 xxxxxxxxxxxxxxxxxxxx

privilege exec level 5 show running-config view full
privilege exec level 5 show running-config view
privilege exec level 5 show running-config
privilege exec level 5 show

Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 28 WS-C3650-24PD 16.6.6 CAT3K_CAA-UNIVERSALK9 INSTALL

[LUCA_ITALY]

With priv15 it works, the output is complete

[balaji.bandi]

Sure agreed, need to do some test and get back to you..not so soon for sure.

[haftomgebreyowhans4]

i face this problem to !

[MHM Cisco World]

make new post please

MHM