Privilege needs in WLC managing from Prime 2.2

[David Serarols]

Hello word,

After having installed a Cisco Prime 2.2 and added several WLC, my customer just wants a read only managing from Prime. So, when I added WLC I provided SNMP v3 RO and no telnet/SSH user/password/enable.

The problem is my customer would like to manage Guest Users from Prime, I obviously some kind of write privilege is needed. Changing SNMP from RO to RW would be enough? Or maybe I have to add a SSH/telnet user/password/enable to manage it? Or maybe I will be both SNMP RW and telnet/SSH?

Thank you very much!

David

[AFROJ AHMAD · Accepted solution]

Hi David,

most likely you would need RW and ssh\telnet as well ,however it depends on what kind of operations your guest user will have access to.

Thanks-

Afroz

***Ratings Encourages Contributors ***

[David Serarols]

Hi Afroj,

Thank you very much. Mostly I'd like to manage WLC in order to add or remove guest users, what do you think?

[AFROJ AHMAD]

you would need "RW" in most cases, for you also "RW" should be fine.

Thanks-

Afroz

***Ratings Encourages Contributors ***

[David Serarols]

Thank you very much! I will try with these privileges :-)

[David Serarols]

Hello,

We changed SNMP from RO to RW and we verified that guest users are manageable from Prime without any enable user.

Thank you very much!