"errdisable recovery" command

[root94]

Hello,

I would want to know if the command "errdisable recovery cause gbic-invalid" is available on Cisco ISR4221, 4331 and 4351 routers.

Thank you !

[balaji.bandi]

Hope this information help you : (its for switch Router should be same)

https://www.cisco.com/c/en/us/support/docs/interfaces-modules/gbics/200296-Unsupported-GBIC-SFP-in-sub-module-of.html

[Flavio Miranda]

Hi

 errdisable  is consequency of Port-Security action and this router seems not use Port-security feature.

https://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/data_sheet-c78-732542.html 

https://www.cisco.com/c/en/us/support/routers/4000-series-integrated-services-routers-isr/products-command-reference-list.html 

[MHM Cisco World]

no errdisable detect cause gbic-invalid <- check this command if you not work

[David Ruess · Accepted solution]

Hello,

Not sure that command set is on Router images. Err-disable (in my experience) is a L2 and with GBICs L1 feature. Not saying it cant be but I have not seen documentation otherwise.

According to the CISCO 4400 configuration guides from CISCO the Err-disable recovery option is not there.

-David

[root94]

Thank you to all of you.