09-18-2022 02:59 AM
I'm handling switches at a site ( 6500 core , 4500 server farms , and 3xxx edge switches) I'm wondering what can i do beyond the below point to make sure the network is healthy:
-taking backups of all switches
-drawing a diagram of the network with uplinks ports and ip
-firmaware upgrades
Solved! Go to Solution.
09-18-2022 03:09 AM
Set up a syslog Server (send all devices logs to syslog server)
setup an NMS
- check the Port-utilisations
- check any interface errors
- check status of port going up ad down. (setup a alerts)
- setup a device reachability in NMS and if lost get alerts
09-18-2022 03:09 AM
Set up a syslog Server (send all devices logs to syslog server)
setup an NMS
- check the Port-utilisations
- check any interface errors
- check status of port going up ad down. (setup a alerts)
- setup a device reachability in NMS and if lost get alerts
09-18-2022 09:47 PM
can i check the port utilization using this output "txload 1/255, rxload 1/255" from "show interface" ?
09-19-2022 12:51 AM
yes with NMS, what ever you looking to monitor.
or you can write own script to collect the data and alerts email be possible.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide