ā12-23-2020 08:57 AM
ā12-29-2020 06:01 AM
Good and glad to know all working as expected, let us know any further assistance required, if not can we make this as resolved.
ā12-23-2020 09:01 AM - edited ā12-23-2020 09:03 AM
standard break sequnce :
https://www.cisco.com/c/en/us/support/docs/routers/10000-series-routers/12818-61.html
or 4K troubleshoot guide :
ā12-23-2020 09:06 AM
can you be more specific i've been search all the day with no result
thanks for your reply
appreciate that
ā12-23-2020 09:15 AM
here is the steps :
1. power off the device
2. connect console cable. (Configure the terminal to operate at 9600 baud, 8 data bits, no parity, and 1 stop bit (9600 8N1).
3. Power on the device, as soon as you see console output, use break key or cntr + c
you see ROMMON1 >
not sure what you want after that your choice.
ā12-23-2020 04:29 PM
If @balaji.bandi instruction does not work then format the bootflash: and reboot the router.
ā12-24-2020 09:11 AM
actually i want to rest the password for the router
how can i reach the bootflash: ?
ā12-24-2020 05:15 PM
if you want to reset the password, if the password option not disabled.
below URL (this was advise in the past post) still valid.
ā12-29-2020 05:40 AM - edited ā12-29-2020 05:58 AM
Thanks for your help it was a problem in the router when i replaced it ,able to get log in to the rommon mode
ā12-29-2020 06:01 AM
Good and glad to know all working as expected, let us know any further assistance required, if not can we make this as resolved.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide