Stack Port Status - SNMP - Cisco SX350X-24

[mpal]

Hi,

We have 2 Cisco SX350X-24 Switches and they are stacked. 

I have configured SNMP and used 1.3.6.1.2.1.2.2.1.8 for the Port Status. All the Ports Status are showing correctly except for the Stacked Ports. The value is 6 always, even if the cable is connected or disconnected.

Please guide me which OID can be used to check the Port Status for Stacked Ports.

[balaji.bandi]

try suggest OID for the model you have :

https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-200-series-smart-switches/smb5512-cisco-small-business-switches-model-object-identifiers-oids.html#350x

[mpal]

Hi Balaji,

I am unable to find the OID of the required Model

[Georg Pauwen]

Hello,

try:

1.3.6.1.2.1.2.2.1.7

Returned values are:

up(1),
down(2),
testing(3)

[mpal]

When I use this OID, the values are always 1, whether the port is connected/disconnected.

[NeverOutofTune]

I have this same problem.. Did you every find a solution?

[NeverOutofTune]

For CBS350-4x, I found this OID to be useful

1.3.6.1.4.1.9.6.1.101.53.23.1.3.52  =  3 when connected, 0 when not connected

the last digit, .52 corresponds to the interface index number.  In this case, I am monitoring Te4 of a CBS350-24T-4X.  1 - 48 corresponds to the copper ports (even though this switch only has 24 copper ports).

Te3 = switch 1 index # 51 and switch 2 index # 103

Te4 = switch 1 index # 52 and switch 2 index # 104

OIDs in the same area:

From a stack with all stack ports connected (switch 1 te3 -> switch 2 te3, and switch 1 te4 -> switch 2 te4).

1.3.6.1.4.1.9.6.1.101.53.23.1.1.51 = "103" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.1.52 = "104" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.1.103 = "51" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.1.104 = "52" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.2.51 = "2" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.2.52 = "2" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.2.103 = "1" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.2.104 = "1" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.3.51 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.3.52 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.3.103 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.3.104 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.4.51 = "1" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.4.52 = "1" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.4.103 = "2" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.4.104 = "2" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.5.51 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.5.52 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.5.103 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.5.104 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.6.51 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.6.52 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.6.103 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.6.104 = "3" [ASN_INTEGER]

Another stack with Te4 disconnected:

1.3.6.1.4.1.9.6.1.101.53.23.1.1.51 = "103" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.1.52 = "0" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.1.103 = "51" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.1.104 = "0" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.2.51 = "2" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.2.52 = "0" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.2.103 = "1" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.2.104 = "0" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.3.51 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.3.52 = "0" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.3.103 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.3.104 = "0" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.4.51 = "1" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.4.52 = "1" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.4.103 = "2" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.4.104 = "2" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.5.51 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.5.52 = "0" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.5.103 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.5.104 = "0" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.6.51 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.6.52 = "2" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.6.103 = "3" [ASN_INTEGER]
1.3.6.1.4.1.9.6.1.101.53.23.1.6.104 = "2" [ASN_INTEGER]