06-20-2012 10:10 AM
hello
I have a new installed LMS 4.1 application on a virtual machine. First everything was ok but now I’m unable to access the application via web interface … but the ssh connection is working just fine.
It is my fist LMS installation and I need some help
Thanks!
Solved! Go to Solution.
06-20-2012 12:54 PM
check the pdshow to see what parts of LMS are running
check if apache is running if not check eventlog why not
check this document: https://supportforums.cisco.com/docs/DOC-14520
cheers
Michel
06-20-2012 12:54 PM
check the pdshow to see what parts of LMS are running
check if apache is running if not check eventlog why not
check this document: https://supportforums.cisco.com/docs/DOC-14520
cheers
Michel
06-21-2012 04:40 AM
Hello Michel
The apache server was shut down (in don’t know why?!):
Process= Apache
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 06/20/12 19:24:48
Stop = 06/20/12 19:24:48
Core = Not applicable
Info = Application started by administrator request.
After restart off apache server, I’m back in business.
Thanks for your time and help!
Best regards,
Liviu
04-25-2013 08:13 AM
This is nice but it is for Windows only I have installed this on a VMware sever using Linux redhat 64 byte this Doc does not help
04-25-2013 02:05 PM
For Soft Appliance version you can start by checking the status from the basic cli. If you need to restart a specific process and don't want or need to restart the whole application ("application start LMS"), you need to drop into the OS shell and issue the pdexec
Here is an example (using pipe to include to abbreviate output and the pdexec command to show verbose process status at the OS cli):
SecLab-LMS/admin# show application status LMS | i Apache
Apache Running normally 5674
SecLab-LMS/admin# shell
Enter shell password :
Starting shell...
[SecLab-LMS/root-ade ~]# pdshow Apache
Process= Apache
State = Running normally
Pid = 5674
RC = 0
Signo = 0
Start = 04/23/13 08:03:20
Stop = Not applicable
Core = Not applicable
Info = Web Server initialized ok.
[SecLab-LMS/root-ade ~]#
I'll add the above as a comment to the earlier linked document to aid other seekers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide